梳型產生器/ Comb-Generators (9kHz~30MHz,30MHz~1G,1GHz~18GHz)

傳導干擾檢測場地標準訊號源  頻段(9kHz~30MHz)

The main application of Conducted Comb Generator is to quickly verify conducted emissions test setups. And the most important application is trouble conducted measurements using an ISN.

規格：

Frequency Range   50kHz - 30MHz
Frequency Step     50kHz/500kHz switchable
Charging time       16 Hours
Re-Charge time      5Hours
Size                     120mm(W)*82mm(D)*85mm(H)
Net Weight           1.1Kg



  

LISN (RBW＝10kHz   VBW=30kHz)

ISN of RJ45 (RBW＝10kHz   VBW=30kHz)



ISN of RJ11 (RBW＝10kHz   VBW=30kHz)

輻射干擾檢測場地標準訊號源 頻段(30MHz~1GHz)



The main application of Comb Generator is to quickly verify conducted emissions test setups. And the most important application is trouble shooting Open Area Test Sites(OATS).An OATS must be completely calibrated before it is put into service.

規格：

Frequency Range      30MHz - 1GHz
Frequency Step        5/10MHZ,5MHz,10MHz,25MHz
Power Requirements  USB mini,+5Vdc
Output connectors    50 ohm，SMA Female
Charging time          10~12 Hours
Re-Charge time         16 Hours
Size                        120mm(W)*82mm(D)*85mm(H)
Net Weight              1.1Kg



Vertical  


 
Horizontal

    

The main application of  Comb Generator is to quickly verify conducted emissions test setups. And the most important application is trouble shooting Open Area Test Sites(OATS).An OATS must be completely calibrated before it is put into service.

規格：

Frequency Range         1GHz - 18GHz
Frequency Step           250MHz
Power Requirements    USB mini,+5Vdc
Output connectors       50 ohm，SMA Female
Charging time             10~12 Hours
Re-Charge time            5 Hours
Size                           120mm(W)*82mm(D)*85mm(H)
Net Weight                 1.1Kg

傳導干擾檢測場地標準訊號源  頻段(9kHz~30MHz)

The source is designed for rapid evaluation of a conducted emission measurement set-up, such as Line Impedance Stabilisation Networks (LISN).

規格:

Frequency range: 9kHz – 50MHz.
Power: 90 – 250 Vac / 50-60Hz.
Connector: Eurostyle.
Frequency stability: Quartz driven.
Amplitude stability: Typical < 0.1db.
Power indicator: LED.
Temp. range: 0° – 40°C.
Dimensions: 120 × 65 × 40 mm.
Weigth: 0.2 kg.

輻射干擾檢測場地標準訊號源 頻段(30MHz~1GHz)

The source is designed for rapid evaluation of an EM test site and its performance. The field reference source uses a precision transmission line pulser to generate an accurate, stable output at a repetition rate of 1 or 5 MHz.

規格:

Technical data
Frequency range : 10 MHz – 1.5 GHz
Frequency spacing : 1 MHz or 5 MHz,
selectable
Stability
Frequency : 100ppm over 0 – 70°C
Amplitude : ± 0.1 dB over the battery
life time
Battery operation
Battery operation time : approx. 30 hrs
Battry type: 6 AA : NiMH, internal.
Charge time approx. : 6 hrs