The probes from the 200 and 300 series are available for burst pulse injection (set up). Their dimensions depend on the burst injection mechanisms in electronic modules. The probes from the 200 series are designed for measurements on supply and GND pins. They have a much higher coupling capacitance and an extremely low resistance. They are supplied and controlled by the BPS 201 Burst Power Station.
Technical data:
|
Burst-Probes:
|
Probe P201 - burst-i
|
Probe P211 - burst-i
|
Probe P301 - burst-u
|
Probe P301 - burst-u
|
|
Pulse shape:
|
1.5 - 5 ns
|
1.5 - 5 ns
|
1.5 - 20 ns
|
1.5 - 20 ns
|
|
Coupling capacitance:
|
1.2 µF
|
1.2 µF
|
18 pF
|
18 pF
|
|
Internal resistance:
|
1 Ohm
|
1 Ohm
|
100 Ohm
|
100 Ohm
|
|
Pulse voltage:
|
± 5 - 40 Volt
|
± 0.5 - 5 Volt
|
± 120 - 500 Volt
|
± 5 - 140 Volt
|
詳細規格：
P200/P300
| 
